PIC16F688-I/ST MICROCHIP
| Case: | TSSOP14 |
| Number of I/O: | 12 |
| RAM memory: | 256B |
| Supply voltage range: | 2,0V ~ 5,5V |
| FLASH memory: | 4kB |
| Frequency: | 20,000MHz |
| EEPROM memory: | 256B |
| Quantity of pcs. | 96+ (Please wait for the order confirmation) |
|---|---|
| Net price (EUR) | 2,6680 |
| Case: | TSSOP14 |
| Number of I/O: | 12 |
| RAM memory: | 256B |
| Supply voltage range: | 2,0V ~ 5,5V |
| FLASH memory: | 4kB |
| Frequency: | 20,000MHz |
| EEPROM memory: | 256B |
| Operating temperature (range): | -40°C ~ 85°C |
| Architecture: | 8-bit |
| ADC: | YES |
| CAN interface: | NO |
| DAC: | NO |
| ETHERNET interface: | NO |
| Encryption: | NO |
| SPI interface: | YES |
| TWI (I2C) interface: | YES |
| UART/USART interface: | YES |
| USB interface: | NO |
| Manufacturer: | MICROCHIP |
PROPERTIES:
- Efficient RISC architecture; 35 instructions executed in a single clock cycle (except for jumps); 1 cycle = 200ns for fCLK = 20MHz
- 8-level hardware stack (13 bits)
- Internal oscillator: 8MHz or 31kHz
- Power-On Reset function
- Brown-Out Reset function
- Power-Up Timer extends reset signal after power-on by 64ms
- Oscillator Start-Up Timer extends reset signal until oscillator frequency stabilizes
- Programmable Watchdog with a built-in internal oscillator
- Programmable code protection against reading
- Maximum clock frequency: 20MHz
- Operating temperature: -40÷85°C
PROGRAM MEMORY:
- Memory type: FLASH
- Capacity: 7kB
- Memory word length: 14-bit
- In-system programming possible via 2 pins - ICSP(TM)
DATA MEMORY:
- 256B SRAM
- 256B EEPROM
PERIPHERALS:
- 8-channel 10-bit A/D converter
- 12 input/output lines capable of directly driving LEDs
- 8-bit timer/counter with prescaler Timer0
- Advanced 16-bit timer/counter with prescaler Timer1
- 2x comparator with programmable voltage reference
- Advanced asynchronous/synchronous serial communication module EUSART
ELECTRICAL PARAMETERS:
- Supply voltage: 2.0÷5.5V
- Current consumption:
Active mode: 220mA for fCLK = 4MHz, VDD = 2.0V
Sleep mode: 50nA for VDD = 2.0V
Microchip's 8-bit PIC microcontrollers with RISC architecture are characterized by high I/O pin current efficiency, low power consumption, and a built-in Watchdog and power-on reset function. Featuring two separate internal buses: address and data, they utilize pipeline processing. All registers, including I/O ports, timers, and the instruction counter, can have their contents modified in a single operation. All instructions require a single cycle to execute (200ns at 20MHz), except for jump instructions, which require two cycles. Available in 6-, 8-, 14-, 18-, 20-, 28-, 40-, 44-, 64-, 80-, and 100-pin packages, with FLASH or OTP program memory, non-volatile EEPROM data memory, and operational RAM. Designed for a wide range of applications, from simple projects to highly complex "high-performance" systems. ISP allows most devices to be programmed directly in-system.