PIC16F88-I/P
| Case: | PDIP18 |
| Number of I/O: | 16 |
| RAM memory: | 368B |
| Supply voltage range: | 4V~5,5V |
| FLASH memory: | 7kB |
| Frequency: | 20,000MHz |
| EEPROM memory: | 256B |
| Quantity of pcs. | 1+ (Need a significantly larger quantity? Ask for price). |
|---|---|
| Net price (EUR) | 3,7042 |
| Case: | PDIP18 |
| Number of I/O: | 16 |
| RAM memory: | 368B |
| Supply voltage range: | 4V~5,5V |
| FLASH memory: | 7kB |
| Frequency: | 20,000MHz |
| EEPROM memory: | 256B |
| Architecture: | 8-bit |
| Operating temperature (range): | -40°C ~ 85°C |
| ADC: | YES |
| CAN interface: | NO |
| DAC: | NO |
| ETHERNET interface: | NO |
| Encryption: | NO |
| SPI interface: | YES |
| TWI (I2C) interface: | YES |
| UART/USART interface: | YES |
| USB interface: | NO |
| Manufacturer: | MICROCHIP |
FEATURES
- Efficient RISC architecture: 35 instructions executed in one clock cycle; 1 cycle = 200ns for fCLK = 20MHz;
- 8-level hardware stack (13 bits);
- Internal oscillator block: 8 possible frequencies;
- Power-On Reset function;
- Brown-Out Reset function;
- Reset signal extension after power-up by 72ms (Power-Up Timer);
- Reset signal extension until oscillator frequency stabilizes (Oscillator Start-Up Timer);
- Programmable Watchdog timer with built-in internal oscillator and prescaler;
- Programmable program protection against readout;
- Maximum clock frequency: 20MHz;
- Supply voltage: 4V~5.5V;
- Operating temperature: -40°C ~ 85°C.
PROGRAM MEMORY
- Memory type: FLASH
- Capacity: 7kB;
- Memory word length: 14-bit;
- In-system programming possible via 2 pins (ICSP™).
DATA MEMORY
- 368B SRAM
- 256B EEPROM
PERIPHERALS
- 16 I/O pins;
- 7-channel 10-bit A/D converter;
- 8-bit timer/counter with prescaler Timer0;
- 16-bit timer/counter with prescaler Timer1;
- 8-bit timer/counter with prescaler and postscaler Timer2;
- 2x Comparator with programmable reference voltage source;
- Addressable asynchronous/synchronous serial transmission module AUSART;
- Synchronous serial port SSP operating in SPI or I2C mode;
- Advanced capture/compare/PWM module (CCP).
Microchip's 8-bit RISC microcontrollers are characterized by high I/O pin current efficiency, low power consumption, and a built-in Watchdog timer with power-on reset functionality. Featuring separate internal address and data buses, they use pipelined processing. All registers, including I/O ports, timers, and instruction counters, can have their contents changed in a single operation. All instructions take one cycle (200ns at 20MHz), except jump instructions, which take 2 cycles. Available in 6-, 8-, 14-, 18-, 20-, 28-, 40-, 44-, 64-, and 80-pin packages with FLASH or OTP program memory, non-volatile EEPROM data memory, and operational RAM. These I/O pins are intended for various applications, from simple projects to highly complex "high performance" systems. ISP allows most devices to be programmed directly in-system.